Brakes

Hayes Brakes

In 1997, Hayes revolutionized the mountain bike industry with the introduction of the first hydraulic braking system.  Since then, Hayes has remained committed to breakthrough design and performance. They are continuously testing and refining products to meet both the performance demands of riders and the need for brake reliability and serviceability.

Hayes has released their award winning Dominion A4 (and now A2) brakes with SFL - small form levers - designed for the smaller hands of junior riders.  Hayes mechanical MX brakes also available for use with V-brake levers.

Set Descending Direction

1-25 of 31

Page:
  1. 1
  2. 2
  1. Hayes MX Expert Mechanical Disc Brake
    Cable activated (works with V brake levers)
    Fits standard 74 mm post mounts, adapters & rotors
    Easily adjusted, simple, reliable and powerful

    Hayes Part Code: 98-31823

    Learn More
  2. JUnit Brake Builder

    From: US$19.68

    To: US$924.31

    Hayes' award winning Dominion Brake is a now a whole range
    4 piston, 2 piston, with levers for large or small hands.

    Learn More
  3. Hayes  new brake for 2020 - the Dominion A2 JUnit SFL
    SFL is a Small Form Lever - designed for the smaller hands of junior riders.

    2 piston version of the award winning Dominion A4
    Two piston caliper with cross-hair alignment
    Flippable lever with reach adjustment
    Dead stroke is factory set
    Pre-bled with short hose for rear use
    Uses DOT 5.1 fluid
    Fits 74 mm post mount brackets and adapters
    Works best with Hayes D series rotors

    Hayes Part Code: 95-36115-K151

    Available direct from Shockcraft or via your local bike shop

    Learn More
  4. Hayes  new brake for 2020 - the Dominion A2 JUnit SFL
    SFL is a Small Form Lever - designed for the smaller hands of junior riders.

    2 piston version of the award winning Dominion A4
    Two piston caliper with cross-hair alignment
    Flippable lever with reach adjustment
    Dead stroke is factory set
    Pre-bled with long cm hose for rear use
    Uses DOT 5.1 fluid
    Fits 74 mm post mount brackets and adapters
    Works best with Hayes D series rotors

    Hayes Part Code: 95-36115-K152

    Available direct from Shockcraft or via your local bike shop

    Learn More
  5. Allows fitment of Shimano Ispec II shifters to Hayes brakes

    Hayes Part Code: 98-36137-K001

    Learn More
  6. Allows fitment of SRAM Matchmaker shifters to Hayes brakes

    Hayes Part Code:  98-36137-K002 Learn More
  7. Hayes Dominion Lever Assembly
    Includes master cylinder and lever blade
    Lever is SFL type (Small Form Lever) for smaller hands
    Same part for left and right
    Lever blade can be swapped to larger size

    Hayes Part Number:  98-36118-K101 Learn More
  8. Hayes  new brake for 2020 - the Dominion A4 JUnit SFL
    SFL is a Small Form Lever - designed for the smaller hands of junior riders.

    Junior version of the award winning Dominion A4
    Four piston caliper with cross-hair alignment
    Flippable lever with reach adjustment
    Dead stroke is factory set
    Pre-bled with short hose for rear use
    Uses DOT 5.1 fluid
    Fits 74 mm post mount brackets and adapters
    Works best with Hayes D series rotors

    Hayes Part Code: 95-36115-K051

    Available direct from Shockcraft or via your local bike shop

    Learn More
  9. Hayes new brake for 2020 - the Dominion A4 JUnit SFL
    SFL is a Small Form Lever - designed for the smaller hands of junior riders.

    Junior version of the award winning Dominion A4
    Four piston caliper with cross-hair alignment
    Flippable lever with reach adjustment
    Dead stroke is factory set
    Pre-bled with long hose for rear use
    Uses DOT 5.1 fluid
    Fits 74 mm post mount brackets and adapters
    Works best with Hayes D series rotors

    Hayes Part Code: 95-36115-K052

    Available direct from Shockcraft or via your local bike shop

    Learn More
  10. Brake pads for Hayes CX, MX and Sole brakes (Hayes)
    T125 semi-metallic compound
    Shape resembles a table tennis paddle

    Hayes Part Code: 98-28142

    Learn More
  11. V Series Brake Rotor 160 mm (Hayes)

    US$46.62

    Available on backorder

    160 mm (6") Rotor V series for Hayes brakes
    Heavy duty version
    Works with all Hayes brakes
    6 bolt mounting
    Supplied with T25 mounting screws & T25 wrench

    Hayes Part Code: 98-17551

    Learn More
  12. V Series Brake Rotor 180 mm (Hayes)

    US$46.62

    Available on backorder

    180 mm (7") Rotor V series for Hayes brakes
    Heavy duty version
    Works with all Hayes brakes
    6 bolt mounting
    Supplied with T25 mounting screws & T25 wrench
    Hayes Part Code: 98-18638

    Learn More
  13. 160 mm (6") Rotor L series for light weight application
    Works with all Hayes brakes
    6 bolt mounting
    Supplied with T25 mounting screws & T25 wrench

    Hayes Part Code: 98-28061-K001 Learn More
  14. Disc Brake Adapter +20mm
    Fits 160 mm Post mount (standard 74 mm spacing).
    Adapts to fit 180 mm disc rotor
    Also adapts 140mm to 160mm.

    Hayes Part Code: 98-32223

    Works with disc brakes and forks from all manufacturers Learn More
  15. I.S. to Post Mount R203 Adapter Kit (Hayes)

    US$19.95

    Available on backorder

    Disc brake mount adapter
    Fits 51 mm IS mount rear bracket & adapts to 74 mm post mount for 203 mm rotor
    Markings: 74-23, FWD

    Hayes Part Code: 98-15074

    Works with disc brakes and forks from all manufacturers Learn More
  16. Disc brake mount adapter
    Fits 51 mm IS mount rear bracket & adapts to 74 mm post mount for 180 mm rotor
    Fits 51 mm IS mount front bracket & adapts to 74 mm post mount for 200 mm rotor
    Markings: R180, IS, 33

    Hayes Part Code: 98-18642

    Works with disc brakes and forks from all manufacturers Learn More
  17. Disc brake mount adapter
    Fits 51 mm IS mount front bracket & adapts to 74 mm post mount for 180 mm rotor
    Fits 51 mm IS mount rear bracket & adapts to 74 mm post mount for 160 mm rotor
    Markings: UP, 32

    Hayes Part Code: 98-18640

    Works with disc brakes and forks from all manufacturers Learn More
  18. Disc brake adapter
    Fits 160 mm Post mount (standard 74mm spacing)
    Adapts to fit 203 mm disc rotor
    Markings UP, 74-21, J
    Hayes Part Code: 98-15072

    Works with disc brakes and forks from all manufacturers

    Learn More
  19. Disc brake mount adapter
    Fits 51 mm IS mount front bracket & adapts to 74 mm post mount for 180 mm rotor
    Fits 51 mm IS mount rear bracket & adapts to 74 mm post mount for 160 mm rotor
    Markings: 74-26

    Hayes Part Code: 98-15073

    Works with disc brakes and forks from all manufacturers

    Learn More
  20. Disc Brake Adapter
    Fits 180 mm Post mount (standard 74 mm spacing)
    Includes 2X M6 x 13 bolts
    Adapts to fit 203 mm disc rotor
    Markings 203, PM7,39

    Hayes Part Code: 98-30027

    Works with disc brakes and forks from all manufacturers

    Learn More
  21. Disc brake mount adapter
    Fits 51 mm IS mount front bracket & adapts to 74 mm post mount for 160 mm rotor
    Fits 51 mm IS mount rear bracket & adapts to 74 mm post mount for 140 mm rotor
    Markings: F160, R140, IS, 38

    Hayes Part Code: 98-15068

    Works with disc brakes and forks from all manufacturers Learn More
  22. Pro Bleed Kit with DOT 4 Fluid (Hayes)

    US$59.74

    Available on backorder

    DOT 4 bleed kit for all Hayes brakes except Radar
    Includes luer-lock syringes, M5 bleed fittings, tubing, brass olives, 118 cc of Hayes DOT 4 oil & a bleed block
    Comes in a tough reusable Sterilite container

    Hayes Part Code: 98-23572

    Fluid and fittings also work with other brakes using DOT 3,4 or 5.1 fluid and standard M5 fittings

    Do not use this kit with mineral oil brakes Learn More
  23. Pro Bleed Kit with DOT 5.1 Fluid (Hayes)

    US$75.31

    Available on backorder

    DOT 5.1 bleed kit for all Hayes brakes except Radar
    Includes luer-lock syringes, M5 bleed fittings, tubing, brass olives, 118 cc of Hayes DOT 5.1 oil & a bleed block
    Comes in a tough reusable Sterilite container

    Hayes Part Code: 98-36770

    Fluid and fittings also work with other brakes using DOT 3,4 or 5.1 fluid and standard M5 fittings
    DOT 5.1 is the fluid with the highest boiling points for the hardest usage.

    Do not use this kit with mineral oil brakes


    Learn More
  24. Brake Feeler Gauge Tool (Hayes)

    US$24.61

    Available on backorder

    Feeler gauge tool for brake setup
    Accurately sets caliper alignment to rotor
    Folds away for storage

    Hayes Part Code: 98-23972

    Learn More
  25. Hose barb insert and olive combination for Hayes brake hose.
    Needed when shortening or replacing brake hose.

    Fits all Hayes hydraulic disc brake lines from 1997 to current.

    Hayes PN: 99-16602
    Sold individually Learn More

Set Descending Direction

1-25 of 31

Page:
  1. 1
  2. 2