We are OPEN
Click here for updates on our current status.

 

Bearings

Set Descending Direction

9 Item(s)

  1. Application: 1 1/8" Headsets (Cane Creek, Woodman, FSA) & GT I-drive Suspension Pivots
    36 x 45 degree ACB
    ID: 30.1 mm, OD: 41 mm, W: 6.5 mm Learn More
  2. Application: 1 1/8" Headsets (Cane Creek, Woodman, FSA) & GT I-drive Suspension Pivots
    36 x 45 degree ACB
    ID: 30.1 mm, OD: 41 mm, W: 6.5 mm Learn More
  3. Application: Lower race of 1.5" straight and tapered headsets
    36 x 45 degree ACB
    ID: 40 mm, OD: 52 mm, W: 7 mm Learn More
  4. Application: 1 1/8" 4545 Headsets 45 x 45 degree ACB
    41 mm OD, 30.1 mm ID, 6.5 mm W Learn More
  5. Application: 1.5" 4545 Headsets
    45 x 45 degree ACB
    51.9 mm OD, 40mm ID
    6.3mm across chamfers

    Learn More
  6. Application: 1.5" 4545 Headsets
    45 x 45 degree ACB
    ID: 40 mm, OD: 52 mm, W: 7 mm
    7.0 mm across chamfers Learn More
  7. Application: 1 1/8" 4545 Headsets
    45 x 45 degree ACB
    ID: 30.5 mm, OD: 41.8 mm, W: 7.88 mm
    Features single rubber seal (1RS), rolled over outer race & recessed inner chamfer
    Exact replacement for Campy 4545 1 1/8" bearings Learn More
  8. Application: 1 1/8" 4545 Headsets using campagnolo (campy) style 45 x 45 degree ACB bearings ID: 30.5 mm, OD: 41.8 mm, W: 6.4 mm

    Two rubber seals (2RS) This bearing looks different but is a direct fit to replace the one-side-sealed Campy 4545 1 1/8" bearings

    Straight replacement for Campy 4545 1 1/8" bearings Learn More
  9. Alternative product: Campy 4545 1 1/8" 1RS Headset Bearing (Monocrome)

    Application: 1 1/8" 4545 Headsets
    45 x 45 degree ACB
    ID: 30.1 mm, OD: 41.8 mm
    Two rubber seals (2RS)
    This will fit most Campy applications but has a slightly smaller ID than the Campy 4545 1 1/8" bearings Learn More

Set Descending Direction

9 Item(s)